REFFLEX®  Certifications

REFFLEX® is tested and compliant to EN1736, ISO9223, UL as well as REACh and ROHS

Technical specifications

Operation temperature -40°C/115°C
Max working pressure 80 bar
Bending radius DN-2.0 50mm
Burst pressure DN-2.0 > 700 bar
Bending radius DN-5.0 100mm
Burst pressure DN-5.0 > 500 bar
EN1736 permeability Class 1 at 100°C and 130 bar
Refrigerants HFC/HFO, HC and CO2-Sub
ozone-, UV-, and oil resistant yes

EN1736 compliant

Our hoses have been tested by Instituto Giordano, Italy, and found compliant with EN1736:2009 norm which regulates the requirements of:

  • pressure strength
  • burst pressure
  • fatigue resistance
  • permeability rate

of non-metallic tubes used in air conditioning and refrigerating systems, including heat pumps.

ISO9223 compliant

Our fittings have been tested and confirmed compliant with ISO9223 norm. ISO9223:2012 establishes a classification system for the corrosivity of atmospheric environments.

Our fittings have been rigorously tested by M2Lab, the Netherlands. Please find the result certificates herewith.

UL recognised

UL Recognized products are typically parts or components that are manufactured to meet particular industry specifications. These components may be partially complete or have limited operation, as they are intended to be incorporated into larger products or systems. UL Recognition is therefore focused on smaller scale parts and components.

The UL Recognized seal means that the product has been tested by UL to nationally recognized safety and sustainability standards.

 

 

UL Logo
UL Recognised

REACh

REFFLEX® International B.V. declares, to the best of our knowledge, that our products comply with the requirements as stated in Regulation (EC) No 1907/2006 of the European Parliament and the Council of 18th December 2006 regarding REACh.

REFFLEX® International B.V. is constantly monitoring its supply chain in order to guarantee to its customers full conformance to these regulations. The regulation requires a duty to communicate information from a content of more than 0.1% acc. to Article 33 of the REACh regulation.

Our products are not intended for prolonged human contact, or ingestion, or inhalation therefore these products are not harmful when applied and used as intended.

 

RoHS

REFFLEX® International B.V. declares, to the best of our knowledge, that our products comply with the requirements as stated in Regulation (2011/65/EU and amendments of the European Parliament regarding RoHS.

None of the REFFLEX® flexible hoses and fittings contain any hazardous substances which are subject to restrictions according to European Directive 2011/65/EU (RoHS), appendix II (‘RoHS 2’), including amendment (EU) 2015/863 dated 31 March 2015 ‘RoHS3’)