REFFLEX®  DN-5.0 NH3  crimp fittings

To assemble REFFLEX®  DN-5.0 hoses, our crimping and pre-assembly tools are required. Please also see our detailed instructions.

These NH3 fittings are made of Stainless Steel 316 and have been tested 1.000 hrs on NH3  exposure. These fittings should only be used with our special DN-5.0 CO2-T/NH3  tube.

REFFLEX | DN-5.0 NH3 straight
Article XXXX
200645: NH3 straight ermeto
316 stainless steel straight ermeto fitting
303 stainless steel crimping sleeve
Packed per 25 pieces
REFFLEX | DN-5.0 NH3 angle
Article XXXX
200645: NH3 angle ermeto
316 stainless steel 90° angle ermeto fitting
303 stainless steel crimping sleeve
Packed per 25 pieces

Stainless steel RVS316 fittings

The REFFLEX® NH3 fittings are Stainless Steel 316 ermeto fittings, either straight or 90° angled. The fittings have been independently tested to 1.000hrs of exposure to NH3.

This tube is also available as fabricated hose made to specifications.

With REFFLEX®, your refigeration or heat pump system is compliant with EN378 and DIN8975 (DN-5.0) and you simplify the connection of:

  • Pressure switches
  • Pressure transducers
  • Manometers
  • Water flow controls
  • Fan speed controls
  • Oil separators and level regulators

Certificates

REFFLEX® DN-5.0 NH3 certificate