200640 Manual/hydraulic crimping tool 5.0 mm
   

Manual operated hydraulic crimping
tool for our DN-5.0 mm crimping system.
 
Pre-assembly with our tool 200627 is
required before crimping.
 
After pre-assembly you can use this
tool as an alternative to the work bench
tool 200636 when you have no
possibility to use a vice.
 
Please contact us for more information.
 
 
Hand held crimping tool 2.0 mm Small tube cutter 2.0 mm HD Workbench crimping tool Pre-assembly tool 5.0 mm HD tube cutter Manual/hydraulic crimping tool 5.0 mm Hydraulic crimping head <<< All special Refflex® tools
Calculate length of hose to be cut as follows: Actual hose length is nominal length minus total value of of fittings applied. 
Example; required 2.0 mm hose total length 1,000 mm with straight and 90° angle fitting 7/16" UNF: length of hose to be cut off the coil equals 1,000 less (20 + 25) = 955 mm.

REFFLEX® and COLDFLEX® is a registered trademark of REFFLEX-International BV in Rotterdam, of purely Dutch origin and is in accordance with EN 1736 and RoHS.