200639 HD tube cutter
   

Heavy duty tube cutter.
 
Suitable for both our DN-2.0 mm and
DN-5.0 mm system tube.
 
The knife on this tool can be
replaced (spare knives are available).
 
 
 
 
 
 
 
Hand held crimping tool 2.0 mm Small tube cutter 2.0 mm HD Workbench crimping tool Pre-assembly tool 5.0 mm HD tube cutter Manual/hydraulic crimping tool 5.0 mm Hydraulic crimping head <<< All special Refflex® tools
Calculate length of hose to be cut as follows: Actual hose length is nominal length minus total value of of fittings applied. 
Example; required 2.0 mm hose total length 1,000 mm with straight and 90° angle fitting 7/16" UNF: length of hose to be cut off the coil equals 1,000 less (20 + 25) = 955 mm.

REFFLEX® and COLDFLEX® is a registered trademark of REFFLEX-International BV in Rotterdam, of purely Dutch origin and is in accordance with EN 1736 and RoHS.