200636 HD workbench tool 2.0 + 5.0 mm
   

Heavy duty crimping tool for both our
DN-2.0 mm and DN-5.0 mm crimping
system.
 
The tool has to be placed in a vice for
proper usage.
 
Before pressing the DN-5.0 mm fitting
you will have to use the pre-assembly
tool 200627/637. The DN-2.0 mm fittings
can be pre-assembled by hand.
 
Please check the manual before using.
 
Hand held crimping tool 2.0 mm Small tube cutter 2.0 mm HD Workbench crimping tool Pre-assembly tool 5.0 mm HD tube cutter Manual/hydraulic crimping tool 5.0 mm Hydraulic crimping head <<< All special Refflex® tools
Calculate length of hose to be cut as follows: Actual hose length is nominal length minus total value of of fittings applied. 
Example; required 2.0 mm hose total length 1,000 mm with straight and 90° angle fitting 7/16" UNF: length of hose to be cut off the coil equals 1,000 less (20 + 25) = 955 mm.

REFFLEX® and COLDFLEX® is a registered trademark of REFFLEX-International BV in Rotterdam, of purely Dutch origin and is in accordance with EN 1736 and RoHS.