200632 crimping tool 2.0 mm
   

Hand held crimping tool, suitable
for our DN-2.0 mm system only.
 
Before using please check the manual.
 
For pressing the 5.0 mm fittings you
will at least have to use the work bench
tool 200636.
 
 
 
 
 
 
Hand held crimping tool 2.0 mm Small tube cutter 2.0 mm HD Workbench crimping tool Pre-assembly tool 5.0 mm HD tube cutter Manual/hydraulic crimping tool 5.0 mm Hydraulic crimping head <<< All special Refflex® tools
Calculate length of hose to be cut as follows: Actual hose length is nominal length minus total value of of fittings applied. 
Example; required 2.0 mm hose total length 1,000 mm with straight and 90° angle fitting 7/16" UNF: length of hose to be cut off the coil equals 1,000 less (20 + 25) = 955 mm.

REFFLEX® and COLDFLEX® is a registered trademark of REFFLEX-International BV in Rotterdam, of purely Dutch origin and is in accordance with EN 1736 and RoHS.