200631 2.0 mm straight 1/4" (7/16" UNF)
   

= 20 mm

 A = Aluminium crimping sleeve
B = Straight brass fitting
C = 7/16" UNF hot-forged brass nut
Optional: copper gasket B2-4 (item number 200126)
 
 
Required tools;
200632 handheld crimping tool 2.0 mm
or
200636 HD workbench tool 2.0 + 5.0 mm
 
 
Packed per 50 pcs.
2.0 mm straight 1/4" flare fitting 2.0 mm angle 1/4" flare fitting Tee with 3 hose connections Tee with 2 hose connections and 1/4" flare nut Tee with 2 hose connections and 1/4" flare nut 2.0 mm straight 6x100 mm ODS fitting <<< All DN-2.0 mm crimping fittings
Calculate length of hose to be cut as follows: Actual hose length is nominal length minus total value of of fittings applied. 
Example; required 2.0 mm hose total length 1,000 mm with straight and 90° angle fitting 7/16" UNF: length of hose to be cut off the coil equals 1,000 less (20 + 25) = 955 mm.

REFFLEX® and COLDFLEX® is a registered trademark of REFFLEX-International BV in Rotterdam, of purely Dutch origin and is in accordance with EN 1736 and RoHS.